Hi,
After I updated to the 1.114 version, sometimes I got the following error when performing replaygain analysis as a whole album. Any idea?
http://kspqm.kymco.com/ckfinder/resourc ... infail.jpg
Poting
InitGainAnalysis fail occurred sometimes
Re: InitGainAnalysis fail occurred sometimes
ReplayGain does not support such high sample rate, that's why you got this error.
You can
a) If you still prefer to user the ReplayGain, set the SACD output sample rate to 88200, like this https://imgur.com/a/MExmEvo
b) Use EBUR128 - https://imgur.com/a/0Ga9Q0w
You can
a) If you still prefer to user the ReplayGain, set the SACD output sample rate to 88200, like this https://imgur.com/a/MExmEvo
b) Use EBUR128 - https://imgur.com/a/0Ga9Q0w
Re: InitGainAnalysis fail occurred sometimes
Hi,
Strange, I've been applying ReplayGain analysis on wavpacked DFF file for more than 2 years. It was ok on previous version though. BTW, I use foobar to do the same and it still works.
Poting
Strange, I've been applying ReplayGain analysis on wavpacked DFF file for more than 2 years. It was ok on previous version though. BTW, I use foobar to do the same and it still works.
Poting
Re: InitGainAnalysis fail occurred sometimes
Here's the update to try - https://xrecode.com/test2/setup_xrecode ... _1.114.exe
You should be able to analyze using ReplayGain. However, I'd suggest to use the EBU128, as it supports higher sample rate and it is, actually, also used by the foobar as ReplayGain analyzer.
You should be able to analyze using ReplayGain. However, I'd suggest to use the EBU128, as it supports higher sample rate and it is, actually, also used by the foobar as ReplayGain analyzer.