InitGainAnalysis fail occurred sometimes

Bug reports go here.
Post Reply
phuang3
Posts: 21
Joined: Thu Oct 19, 2017 3:31 am

InitGainAnalysis fail occurred sometimes

Post by phuang3 »

Hi,

After I updated to the 1.114 version, sometimes I got the following error when performing replaygain analysis as a whole album. Any idea?

http://kspqm.kymco.com/ckfinder/resourc ... infail.jpg


Poting
admin
Site Admin
Posts: 964
Joined: Wed Nov 17, 2010 12:56 pm

Re: InitGainAnalysis fail occurred sometimes

Post by admin »

ReplayGain does not support such high sample rate, that's why you got this error.
You can
a) If you still prefer to user the ReplayGain, set the SACD output sample rate to 88200, like this https://imgur.com/a/MExmEvo
b) Use EBUR128 - https://imgur.com/a/0Ga9Q0w
phuang3
Posts: 21
Joined: Thu Oct 19, 2017 3:31 am

Re: InitGainAnalysis fail occurred sometimes

Post by phuang3 »

Hi,

Strange, I've been applying ReplayGain analysis on wavpacked DFF file for more than 2 years. It was ok on previous version though. BTW, I use foobar to do the same and it still works.

Poting
admin
Site Admin
Posts: 964
Joined: Wed Nov 17, 2010 12:56 pm

Re: InitGainAnalysis fail occurred sometimes

Post by admin »

Here's the update to try - https://xrecode.com/test2/setup_xrecode ... _1.114.exe
You should be able to analyze using ReplayGain. However, I'd suggest to use the EBU128, as it supports higher sample rate and it is, actually, also used by the foobar as ReplayGain analyzer.
Post Reply