Page 1 of 1

InitGainAnalysis fail occurred sometimes

Posted: Mon Oct 25, 2021 9:42 am
by phuang3
Hi,

After I updated to the 1.114 version, sometimes I got the following error when performing replaygain analysis as a whole album. Any idea?

http://kspqm.kymco.com/ckfinder/resourc ... infail.jpg


Poting

Re: InitGainAnalysis fail occurred sometimes

Posted: Mon Oct 25, 2021 4:45 pm
by admin
ReplayGain does not support such high sample rate, that's why you got this error.
You can
a) If you still prefer to user the ReplayGain, set the SACD output sample rate to 88200, like this https://imgur.com/a/MExmEvo
b) Use EBUR128 - https://imgur.com/a/0Ga9Q0w

Re: InitGainAnalysis fail occurred sometimes

Posted: Tue Oct 26, 2021 9:02 am
by phuang3
Hi,

Strange, I've been applying ReplayGain analysis on wavpacked DFF file for more than 2 years. It was ok on previous version though. BTW, I use foobar to do the same and it still works.

Poting

Re: InitGainAnalysis fail occurred sometimes

Posted: Tue Oct 26, 2021 6:23 pm
by admin
Here's the update to try - https://xrecode.com/test2/setup_xrecode ... _1.114.exe
You should be able to analyze using ReplayGain. However, I'd suggest to use the EBU128, as it supports higher sample rate and it is, actually, also used by the foobar as ReplayGain analyzer.