[SOLVED] Yet another 5.1 to stereo sacd question

Ask questions on how to do this and that here.
Post Reply
voxinbain
Posts: 5
Joined: Sat Apr 09, 2022 1:20 pm

[SOLVED] Yet another 5.1 to stereo sacd question

Post by voxinbain »

Hello!

Before asking the question, I searched the forum and found many similar questions, but this one is a little different.

I'm trying to convert 5.1 dsf to stereo dsf because the 2.0 part of sacd is broken. do I need to adjust the matrices or leave them empty and just set to stereo and then all channels will automatically be mixed as they should or if I need to adjust the matrices, how to do it correctly so as not to lose any channel?

* By this I mean how not to lose the sound and what channels are enough / required in the matrices in this case to bring the result as close as possible to the stereo version?

Thank's! :)
admin
Site Admin
Posts: 964
Joined: Wed Nov 17, 2010 12:56 pm

Re: Yet another 5.1 to stereo sacd question

Post by admin »

Please just set the channels to "Stereo" in the Output Settings. The default settings used will be good enough.
voxinbain
Posts: 5
Joined: Sat Apr 09, 2022 1:20 pm

[SOLVED] Re: Yet another 5.1 to stereo sacd question

Post by voxinbain »

admin wrote: Sat Apr 09, 2022 6:15 pm Please just set the channels to "Stereo" in the Output Settings. The default settings used will be good enough.
Thank you very much! :)
Post Reply