XRECODE

Maybe the question already exists or it's just a matter of settings, then I apologize.

If I break down a 7.1 audio track into individual Wav tracks, the surround back is saved as surround side. Since I need the individual Wavs for DaVinci Resolve, they are then inserted in the wrong order because the side channels come before the backs, but the content is swapped, so the back channels are in the sides and the sides are in the back channels.

is this a bug that XRecode is making is this something that can be adjusted?

What type of audio file did you split?

dts(hd).mka , dd+ mka so different , actually everything that is 7.1

OK, I see. Here's an update to try - https://xrecode.com/test/setup_xrecode3 ... _1.130.exe

After the update, the Tracks are named correctly, but the order is still wrong
she is :
FL
FR
C
LEF
BL
BR
RL
RR
she has to be like that
FL
FR
C
LEF
RL
RR
BL
BR

Here's another update to try - https://xrecode.com/test/setup_xrecode3 ... _1.130.exe
Click on "Split into file per channel" edit the 7.1 matrix like this https://imgur.com/Cth4i2L . It will swap the BL/BR with the RL/RR channels. Now the file will be split according to your settings.

Cool - Very good

THX

Tried the new update, all tracks are named correctly and saved in the correct order with the help of the 7.1 matrix, but the generated WAV tracks have no content, so they remain mute when played

Hmm. Here's another update to try - https://xrecode.com/test/setup_xrecode3 ... _1.130.exe
Please the check the version after the install, it must be
XRECODE 3 [64-bit] - 1.130 [Beta 2023-05-26/2199]

And just double check, that the Matrix is populated with ones for the required channels (and is not all zeroes), e.g. https://imgur.com/pnsDkW2

Yes, now it works as it should