私は
http://xrecode.com/xrecode3/forum/phpBB ... 3&t=46#p80
によってベータ版への更新を指示されました。
http://xrecode.com/xrecode3/forum/phpBB ... 2&t=40#p55
を参照し、両方にチェックを入れ、“今すぐ更新”をクリックしたり再起動したりしましたが、xrecord3はなんらアクションを起こしません。
セキュリティソフトの機能を全て停止しても、結果は同様でした。
Sorry about my poor English.
I was instructed to update to beta by
http://xrecode.com/xrecode3/forum/phpBB ... 3&t=46#p80
http://xrecode.com/xrecode3/forum/phpBB ... 2&t=40#p55
I referred to this, enabled both, clicked "今すぐ更新" or restarted, but xrecord 3 did not take any action.
All the functions of the security software were stopped, but the results were similar.
自動更新機能について
Re: 自動更新機能について
Here's the latest version - http://xrecode.com/xrecode3/download/se ... t_1.43.exe
Re: 自動更新機能について
Thank you very much.
Let me wait and see please.
Let me wait and see please.
Re: 自動更新機能について
URLは64bit版だったので、setup_xrecode3_win_32bit_1.43.exeをダウンロードさせて頂きました。
変わらずなんらアクションを起こしません。
そこで別の64bitパソコンに64bit版をインストールして“今すぐ更新”をクリックしたところ、アップデートが無い旨を通知されました。
32bitはWin7、64bitはWin10です
Since the URL was a 64-bit version, I downloaded setup_xrecode3_win_32bit_1.43.exe.
It does not change and it does not cause any action.
So I installed a 64bit version on a 64bit computer and clicked "Update Now", a notification that there is no update was displayed.
32 bit is Win 7, 64 bit is Win 10
変わらずなんらアクションを起こしません。
そこで別の64bitパソコンに64bit版をインストールして“今すぐ更新”をクリックしたところ、アップデートが無い旨を通知されました。
32bitはWin7、64bitはWin10です
Since the URL was a 64-bit version, I downloaded setup_xrecode3_win_32bit_1.43.exe.
It does not change and it does not cause any action.
So I installed a 64bit version on a 64bit computer and clicked "Update Now", a notification that there is no update was displayed.
32 bit is Win 7, 64 bit is Win 10
Re: 自動更新機能について
32-bit version 1.43 also has that change implemented. Just check the OFR settings.
Re: 自動更新機能について
先ほど11/19の1.43から1.45にアップデートをしました。
チェックは両方に入っていましたが、起動時に自動で確認はしてくれませんでした。
手動での確認、ダウンロード、アップデートは行うことが出来ました。
一つ提案ですが、プログラムの登録者は常に表示する必要が無いと考えます。
起動時のアップデート確認を行うよう設定している場合、アップデートが無い場合もその旨をここに表示しては如何でしょうか。
honyaku
I updated to 1.45 from 1.43 on 11/19.
The check was included in both, but did not automatically check at startup.
I was able to perform manual confirmation, download, update.
Although it is one proposal, I think that the registrant of the program does not have to display all the time.
If you are configuring to check for updates at startup, if you do not have an update, how do you show it to that effect?
チェックは両方に入っていましたが、起動時に自動で確認はしてくれませんでした。
手動での確認、ダウンロード、アップデートは行うことが出来ました。
一つ提案ですが、プログラムの登録者は常に表示する必要が無いと考えます。
起動時のアップデート確認を行うよう設定している場合、アップデートが無い場合もその旨をここに表示しては如何でしょうか。
honyaku
I updated to 1.45 from 1.43 on 11/19.
The check was included in both, but did not automatically check at startup.
I was able to perform manual confirmation, download, update.
Although it is one proposal, I think that the registrant of the program does not have to display all the time.
If you are configuring to check for updates at startup, if you do not have an update, how do you show it to that effect?